manualshive.com logo in svg
background image

 

- GB - 

 

Maintenance and cleaning 

 

 

Attention! Dangerous electrical voltage. 
Possible consequences:

 Death or severe injury. 

Protective measures:

 

  Prior to reaching into the water, disconnect the power supply to all units used in the water. 

  Disconnect the power plug prior to carrying out work on the unit. 

If necessary, clean the unit with clear water using a soft brush. 

  Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or impair the 

function. 

  In the event of stubborn furring (calcium deposits), a common household cleaner free from vinegar and chlorine can 

be used. Subsequently, clean the pump thoroughly using clear water. 

Cleaning the unit 

Unscrew the nozzle tube including T distributor and connection socket (C1). Open strainer casing and remove 
pump (C2). Unscrew pump lid and remove impeller (C3). Clean all components using clear water and a brush. After 
cleaning the pump, reassemble in the reverse order. Insert pump in the strainer casing (C4). Route connection cable 
such that it cannot be pinched. Refit strainer lid and close (C5). 

 

Remedy of faults 

 

Malfunction

 

Cause

 

Remedy

 

The unit is not operating 

No mains voltage 

Check mains voltage 

Impeller blocked 

Clean impeller 

Strainer casing clogged 

Clean strainer casing 

Insufficient delivery rate 

Excessive pressure losses in the hoses 

Reduce hose length and connecting parts to a 
minimum, route hoses as straight as possible 

Unit switches off after a short running period 

Water temperature too high 

Note maximum water temperature of +35 °C 

 
 

Disposal 

 

 

Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided. 
Disable the unit beforehand by cutting off the cables. 

 

Storage/Over-wintering 

Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean and check the unit for damage. 

 

 

Store the unit immersed in water or filled with water in a frost-free place. Do not flood the power plug! 

 
 

Repair 

A damaged unit cannot be repaired and must be put out of operation. Dispose of the unit in accordance with the 
regulations.

 

 

Wear parts 

The impeller unit is a wearing part and does not fall under the warranty. 

14393-11-13_GA_Aquarius Fontain 9   9

12.11.2013   12:02:47

Downloaded from www.watergardeningdirect.com

 

Содержание Aquarius Fountain Set 1000











Отзывы: