Oase Aquamax ECO, Руководство по эксплуатации

Страница: 12 / 116

- EN -
12
Error messages
Once a malfunction has been remedied, the error message automatically disappears.
Error message Cause Remedy
WARNING
NO WATER The pump has run dry (dry run protection has tripped). – Flood the pump.
– Fully submerge the pump for operation in a pond.
– Vent the supply line.
– Remove any blockage from the supply line.
Filter housing clogged (dry run protection has tripped). Clean the pump.
WARNING
MOTOR BLOCKED Impeller unit is blocked (dry run protection has tripped). Disconnect the power supply and remove obstacle. Then
switch the pump on again.
WARNING
HIGH TEMPERATURE Ambient temperature for dry installation is too high. – Avoid exposure to direct sunlight.
– Note maximum water temperature of +35°C.
Water temperature too high Note maximum water temperature of +35°C.
WARNING
HIGH POWER Current consumption too high
– Impeller unit running sluggishly
– Excessively soiled water Clean the pump.
Storage/Over-wintering
The unit is frost-proof to -20 °C. If lower temperatures are expected, the unit must be removed and put into storage.
How to correctly store the unit:
•
Protect the DMX/RDM connectors from moisture and dirt.
Wear parts
The following components are wear parts and are excluded from the warranty:
•
DMX plug seal
Disposal
Do not dispose of this unit with domestic waste! For disposal purposes, please use the return system provided.
Disable the unit beforehand by cutting off the cables.