Oase Aquamax ECO, Руководство по эксплуатации

Страница: 10 / 116

- EN -
10
Fastening the device to the wall
How to proceed:
D
1. Remove the retaining frame and fasten it to the wall using suitable screws.
2. Fit the device into the retaining frame.
– Ensure that the device is properly engaged in the retaining frame.
Connect the unit
How to proceed:
E
1. Remove the protection cap from the unit.
2. Fit the connector of the connection cable and secure with the two screws (max. 2.0 Nm).
– Ensure that the rubber seal is clean and fits exactly.
– Replace the rubber seal if damaged.
– Only connect the plug to the left-hand DMX/RDM socket.
Note!
The device will be destroyed if water penetrates the DMX/RDM sockets.
•
Ensure that the DMX/RDM sockets are closed off by the DMX/RDM plug or protection
cap.
AMX0034
Operation
Control system overview
MODE
1
3
2
5
6
4
ECO EXPERT 21000
SPEED 100 %
AMX0033
Description Function
1 Two-line display with backlighting
2 LED ON/OFF Indicates whether the pump is switched on or off.
3 ON/OFF button For switching the pump on or off.
4 Arrow keys For changing values in the menus or selecting other lines in the
menu.
5 Mode button For selecting the next menu in the display.
The selection is continuous. It continues from the last menu to the first
menu.
6 LED MODE Indicates the pump status.