background image

Workout Memory

The OTM has a memory feature that stores the workout information of the most recent programmed time, distance or 

interval workout.

On completion of the programmed workout the monitor will display an F screen showing the final results of the 

workout.

The OTM also records split results for a set time or distance split ie 2000m workout can record the split results for 

every 500m, giving a total of 4 splits to compare. Each split is numbered for reference.

To scroll through splits, use the ARROW button. To scroll through Averages and other information in the AV display 

field in the top right of the screen, press the AV button.

The OTM will store the results of the most recent workout until another workout is programmed. Once the monitor has 

been reset the previous workout information is erased.

If the monitor powers down, the memory can be recalled by turning the monitor ON and pressing the MEMORY 

button.

On completion of the 2000m 

workout, the OTM will display the 

final results as an F screen.

The information shown will be 

total time taken, average speed 

in time/500m and the average 

strokes per minute.

Press the ARROW buttons to 

move from the F screen to the 

Splits that show the results for 

each split segment. In this case 

every 500m. ( See Setting the 

Splits)

Split Interval 1

Split Interval 2

Split Interval 3

Split Interval 4

Содержание TRAINING MONITOR














Отзывы: