Step 4: Front Leg to Base Rails
7
Tools required: 16mm and 17mm wrench
1.
Align the front extrusion mounts to the top and
bottom of the rails. Push the mounts tight onto the rails
and level with the end of rails.
2.
Slide the front leg bracket over the
extrusion mounts and align bracket holes with
the extrusion mount holes.
3.
Place washers over the bracket holes and insert
bolts through washers and the top and bottom
extrusion mounts. Gently tap or shake the front leg to
help the bolts through the holes.
4.
Add washers and nuts to the underside
bolts and tighten with the 16mm and 17mm
spanners.
5.
Remove the seat box from underneath the
rails and place front leg on floor.