10
Locking the Rolling Frame
The rolling frame of the DX can be easily locked in place so that it can be moved around and also stood upright to
minimise space required when not in use.
Follow the procedure below to securely lock the front assembly in place before moving or standing upright.
TIP: Lock the front assembly every time before moving or lifting the DX.
WARNING
Make sure the locking latch is correctly locked to the frame before moving or standing the DX upright.
Do not try and row the DX while in the locked position as it may cause personal injury or damage to the
machine.
If you are aware of any faulty operation or damage to the locking latch or locking axles, please contact
Oartec immediately for replacement.
Failure due to damage or faulty operation of the locking latch whilst standing the DX upright may cause
serious personal injury or damage to the machine and other property.
1.
By pressing the spring lever, release the locking
latch from the centre of the rail assembly and pivot up
about 45 degrees.
2.
Holding the spring lever open, bring the front
assembly close to the latch and align the front roller
axle with the open latching hook.
3.
Close the latch onto the front roller axle and
release the spring lever to securely lock the front
assembly in place.
