O&M PF4000FH, Руководство пользователя

Страница: 6 / 20

Header mechanism / Manual release guide
PF4000FH
6
Turnstile Maintenance
PF4000FH
This is a brief overview of the workings and location of parts on the header
mechanism and how to set the turnstile in manual mode:
As stated at the beginning of this manual we recommend a bi-annual service, but at a bare minimum, it is imperative
that you get a service done once every 12 months. This is not a sales tactic in disguise, there is a very serious
health and safety issue/risk associated with not complying to this. Also in order for your equipment to keep
complying with the appropriate legislation.
Before carrying out any maintenance to the installation, disconnect the mains power supply.
1. All moving mechanical header parts should be greased once every 6 months
2. Rotor arm rotation checked and secured.
3. All ground fixing nuts to be checked for corrosion.
4. All ground fixing nuts should be checked for tightness and secure the turnstile two the ground.
5. All electrical connections should be checked in accordance with the latest safety standards.
6. All welds and interconnecting parts should be checked for tightness and security.
7. Any defects or failure in the coating of the turnstile should be noted and reported immediately to the seller or
manufacturing company.
8. Rotor arms should be checked for correct function and angle these should be corrected as needed.
9. The turnstile should be checked for any abnormalities that may cause harm or defect to an object or person.
10. The turnstile control board wiring and general condition should be checked.
11. The turnstile header mechanism should be checked for general condition and mechanical functions to ensure
correct operation.
12. All solenoid's and limit switches should be checked for correct operation.
3.
4.
1.
2.
10 mins
60 5
10
15
20
25
30
35
40
45
50
55
!
Header housing
Manual rotate exit key
Manual rotate entry key
Directional LED’s
Upright bolted
to housing
Exit directional
LED’s
Central rotor
Rotor arms
Turnstile housing
Manual rotation unlock keys
Note: the keys may not be inserted as shown into the diagram above. The
keys will be strapped to the turnstile frame when sent out for delivery.
20x Zoom Showing Key Operation
To Manually release the turnstile
turn the key shown a quater turn
clockwise. Do not force the key it
only takes a quarter turn release!
Open Close