O&M PF4000FH, Руководство пользователя

Страница: 13 / 20

Electrical Troubleshooting Guide
PF4000FH
11
Menu/Ok
SR2 B121BD
1 2
Q1
1 2
Q2
1 2
Q3
1 2
Q4
+
-
I1 I2 I3 I4 IB ID IC IE
24VDC
24VDC 24VDC Analog or
IB....IE Inputs I1...I4
Outputs
Q1...Q4 : Relay 8A
1. Inputs
Input Polarity Connected to Operation when active
I1 Normally Closed Lock Turnstile stops if door open
I2 Normally Open Entry Signal Raises Turnstile
I3 Normally Open Exit Signal Lowers Turnstile
I4 Normally Open Entry Limit Detects Vehicle on loop then lowers if no detection present
IB Normally Open Exit Limit Detects vehicle on loop/Lowers when not detected
IC Normally Open Freewheel Turnstile opens when vehicle present on loop
ID Normally Open Spare Input Arm has reached fully closed position
IE Normally Open Not Used Spare not used
2. Outputs
Output: Polarity: Connected to: Operation when active:
Q1 Normally Open Q1(1) = 24v Common
Q1(2) = Entry Solenoid Active to open Turnstile
Q2 Normally Open Q2(1) = 24v Common
Q2(2) = Exit Solenoid Active to close Turnstile
Q3 Normally Open Spare Spare Not Used
Q4 Normally Open Spare Spare Not Used
The table (bottom) relates to the diagram directly below to help you trouble shoot electrical component errors
Menu/Ok
SR2 B121BD
1 2
Q1
1 2
Q2
1 2
Q3
1 2
Q4
+
-
I1 I2 I3 I4 IB ID IC IE
24VDC
24VDC 24VDC Analog or
IB....IE Inputs I1...I4
Outputs
Q1...Q4 : Relay 8A
1. 2.
1 B 234 CDE
RUN LD
SUN 20 JUL 09:36
1234
1234 BCDE
STOP LD
SUN 20 JUL 09:37
2 4 1 3
Input displays
which change
as inputs used
detailed in the
table below.
Example
showing number
I1 and IB input
selected
Showing program in “run mode”
Showing program in “Stop mode”
Output displays
which change
as Outputs used
detailed in the
table below.
Example
showing number
Q1 and Q3
output selected
Date/Time Display Date/Time Display
Note:
For custom programs or “bespoke” solutions please contact us. Do not attempt to modify or change the
program without prior consent as this may pose a health & safety risk. Always use a qualified technician to
make any major changes to the generic control program.
!