OAKWORKS WOMEN'S IMAGING, Инструкция по эксплуатации

Страница: 4 / 36

SYMBOL IDENTIFICATION
SYMBOL IDENTIFICATION
1
SYMBOL IDENTIFICATION
This symbol, when used in this manual and on product labels, represents
a caution warning. Be sure to read and comply with all precautions and
warnings.
This symbol, when used in this manual and on product labels, warns
against an electrical shock hazard. Be sure to observe and comply with all
warnings.
This symbol, when used in this manual or on product labels, indicates a
Protective Earth (Ground) Terminal.
This symbol when used in this manual or on product labels, warns that
during transport there should be no stacking of containers.
This symbol, when used in this manual or on product labels, indicates that
the product should be protected from moisture. The humidity specifications
for Transport & Storage are listed on page 31.
This symbol, when used in this manual or on product labels, indicates that
information is given regarding the recommended temperature limits
during transport and storing.
This symbol, when used in this manual or on product labels, indicates the
date of manufacture of the device.
This symbol, when used in this manual or on product labels, indicates
alternating current (AC).
This symbol, when used in this manual or on product labels, indicates
direct current (DC).
~
----
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
READ AND
SAVE THESE
INSTRUCTIONS
The following Instructions are critical for the Safety of the operator, patient, and any
other individuals in the area of this equipment. The equipment operator should
carefully read the Safety Instructions on this page.
Foot section is not designed to support entire patient weight. Do not sit on foot section.
Table is not to be used as a gurney or to transport patient from room to room.
When the footboards are in the down position, it is possible for them to hit the ground
in low height and high tilt conditions. Operate the table with the footboard up if
possible. If not, then check ground clearance to prevent damage to the footboard.