ATTACHING THE QUICKLOCK™ FACE REST: (cont)
PT300 & Orthopedic Hi-0Lo Casting Table Models only:
When attaching the QuickLock
™
Face Rest, slide the frame dowels
into the webbing loops found at the backrest end of the table, being
sure to keep the 1st cam lock within 3” of the table to ensure a stable
connection. The recommended length of dowel bracing against the backrest
should be at least 2 inches.
To remove the QuickLock
™
Face Rest, just pull the frame from the outlets
until it comes free. Set it safely aside.
Tips for Great Positioning using the QuickLock
™
Face Rest:
• To use the face rest with your clients supine, rotate the face
rest pad so that the thick part of the pad supports your client’s
cervical region. Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support. (see images on
next
page)
DIRECTIONS FOR USE
PRODUCT DESCRIPTION
DIRECTIONS FOR USE
14
•
QuickLock
™
Face Rest
QUICKLOCK™ FACE REST
(CONTINUED):
Be sure to read all cautions,
warnings and instructions given
in the manual to prevent injury
to both operator and client.
IMPORTANT
CAUTION
Do Not extend the dowels of
the Face Rest further than 3”
from the table edge to ensure
a stable connection.
3”
CAUTION
Do not put excessive weight or
pressure on the face rest.
2” or more
* U.S. Patent #5,177,823
