To Adjust the Angle of the Articulating Head Rest:
Certain models in the PT Line come with an Articulating Head
Rest Section that has an adjustment range of 40
˚
to -90
˚
for prone
positioning and the administering of special treatment techniques.
The adjustments to this section are manual. To raise the Head Rest
Section, just grasp the edge of the section and lift up until you
have achieved the angle needed. Release and it will lock into place
automatically.
When lowering the Head Rest Section, you need to unlock the
positioning mechanism. On the PT200 the release mechanism is
a lever; on the PT300 and the Orthopedic Hi-Lo Casting Table the
mechanisim is a knob. They are found under the Head Section on
both sides of the table. They work in tandem and can be accessed
on either side of the table. Be sure you have a firm grip on the
edge of the Head Rest Section. Then twist and hold (be prepared
for a slight drop as the lock mechanism releases) while guiding
the section to the level desired. DO NOT make these adjustments with
the client on the table.
DIRECTIONS FOR USE
DIRECTIONS FOR USE
DIRECTIONS FOR USE
9
•
Adjusting the Articulating Head Rest
ADJUSTING THE ARTICULATING HEAD REST
(PT200, PT300 & ORTHOPEDIC HI-LO CASTING TABLE)
DO NOT sit on the Head Rest
Section.
DO NOT place excess weight
on the Head Rest Section.
DO NOT use it in assisting the
client on and/or off the table.
DO NOT lower the Articulating
Head Rest while the client is
in position on the table. When
making these adjustments make
certain the client is removed
before proceeding.
DO NOT Lower the Head Rest
wihout a firm hold on the top.
To release the lock on the posi-
tion without manually guiding
the top into place could cause
personal injury or damage to
the table.
IMPORTANT
Be sure self-locking molded
rubber feet are flat side down
to ensure safety and stability.
Grasp Firmly & Lift
CAUTION
Release
Lever - PT200
Grasp Firmly & Lift
Release Knob -
PT300 &
Orthopedic HI-Lo
Casting Table
