OAKWORKS PF Series, Руководство пользователя

Страница: 14 / 28

When moving the table, place one person at each corner of the table. Have each person firmly grasp
the base at the bottom and lift the table. Be aware and use proper, safe procedures for moving a table
of this size to prevent injury to yourself or the table. We strongly recommend that a flatbed dolly be
used that can hold the entire table when moving the table long distances.
CAUTION
MOVING THE TABLE
Before moving the table, disconnect the power cord from the power outlet. The table weighs as much
as 235 lbs. (107 kg.) Never lift the table by grasping the table top. You could damage the table and
the electronics that run the tabletop. Four people are required to move the table safely. Do not use
the table to transport a patient.
11
DIRECTIONS FOR USE
Grasp at base
corner
At low height range
Place the table in the location where
you plan to use it.
1. Rock the table to determine if it
is level with the floor. If the table
rocks back and forth at all, the foot
that clears the floor when you rock
the table will need adjustment.
2. Adjust the Leveler Foot by first
loosening the locking nut found just
above the rubber Leveler Foot with
the open-end wrench.
3. Lower the adjustable rubber
Leveler Foot until it meets the floor
snugly. Tighten the locking nut
against the wooden leg of the table
with the open-end wrench to fix the
Leveler Foot in position.
4. Rock the table again to be sure
adjustments have stabilized the
table. If necessary make any addi-
tional adjustments in the same
way.
LEVELING THE TABLE
1/2” (13mm) Open
end Wrench
Leveler Foot
Tighten Locking Nut Locking Nut