16
rePAir ProceDUreS
5. Remove cable ties and obtain slack in the columns power cable under the table. Remove the 4
bolts on the bottom of malfunctioning column.
(Some models have a strain relief; remove (2 screws), then
unplugging on the bottom of the columns power cord from the column above base.) (There is enough room
under the table to do this task without lifting the base from the floor and above the base for the strain relief and
power cord removal.)
6. Reassemble in the reverse order. Torque bolts in column bottom and top to 15 Ft-lbs.
7. Slide the top onto the bearings as you center the top into place.
8. It may be necessary to reset the control box. See table resetting:
TABLE RESET: TABLES MANUFACTURED BEFORE 03/15/12
TABLE RESET: TABLES MANUFACTURED 03/15/12-02/25/13
TABLE RESET: TABLES MANUFACTURED AFTER 02/25/13
9. Please fill out and return a
