Underside of Tabletop
Top pad flap
9
DIRECTIONS FOR USE
TOP PAD REMOVAL
Remove the Top Pad by pulling the flaps at the underside of the table on either end until the Hook
and Loop Faster detaches. Replace the pad by first centering on the table and then pressing the
flaps in place, anchoring the flaps to the Fastener Hook and Loop Faster as shown. (applies to both
the 1” (2.5 cm.) & 2” (5 cm.) pads)
Hook and Loop Faster
All electric tables are equipped with an emergency stop switch.
EMERGENCY STOP
To stop the
operation, push
the red button.
To reset, rotate
the red button
clockwise.
If necessary, you can also remove the plug from the outlet. Be sure access is not blocked for disconnect-
ing the table from power.
