manualshive.com logo in svg

OAKWORKS Clodaghl, Инструкция по эксплуатации, Страница: 21 / 24

Поделиться
Скачать
OAKWORKS Clodaghl Скачать руководство пользователя страница 21

SYMBOL IDENTIFICATION

• How to Care for Your Upholstery

SYMBOL
IDENTIFICATION

13

CARE & CLEANING

CARE & CLEANING

CARE & CLEANING

In order to maintain the quality and ensure the life of the table , here are some preventative 
steps that can be taken to protect the upholstery on the chair and accessories.
 

•    Protect your table and accessories with sheets and fleeces. We offer both 

 

    fitted sheets and thick fleeces that protect your upholstery fabric against oil  

 

    stains while offering comfortable 100% cotton flannel softness to your    

 

    clients. You can also preserve your face rest and bolsters with 100%  

 

 

    cotton flannel covers and fleeces.

 • 

 

Clean your upholstery fabric every day. We recommend cleaning your  

 

    upholstery fabric with a mild detergent to protect it against oil stains  

 

    and dirt which will cause cracking and permanent stains over time.  

 

    Household products you can use include a 4:1 diluted solution of 409

®

  

 

  cleaner, 

Fantastik

®

 or any non-abrasive with a non-alcohol content.  

 

    Products with a high alcohol content, when used over time, will dry  

 

    and eventually crack your upholstery fabric.

 

    Note: Damage caused by them  will not be covered under the warranty.

•     Avoid extremes in heat. Very cold temperatures can make your fabric prone 

 

    to cracking. Very high temperatures can cause the fabric to stretch permanently.

•    Avoid exposing your products to direct sunlight for extended periods of time.  

 

    This can lead to fading and cracking of the fabric.

•    Use an anti-slip pad to prevent oil from reaching the upholstery and to keep  

 

    your sheets from slipping.

 • 

Upholstery

GENERAL CARE OF EQUIPMENT COMPONENTS

 

•    Use only a mild solution of 4:1 diluted non-alcohol cleaner such  

 

 

    as 409®, Fantastik® or some other non-abrasive cleaner to wipe  

 

 

    down the metal surfaces of the chair.  Apply with a damp (not wet) 

 

    lint-free cloth. Be sure excess liquid does not  drip onto, or into,  any of the  

 

    electrical controls or mechanisms.  Be sure that the unit is unplugged before  

 

    cleaning these areas. Wipe these areas carefully with a lint free cloth.

 

•    The electronic powering mechanism of your table requires no general  

 

    maintenance 

or 

lubrication.

 

•    The wooden portions of the equipment can be polished with any  

 

 

    polish approved for wooden surfaces. Spray, or pour, the polish  

 

 

    onto a soft cloth and be careful not to get it onto other surfaces.

  • Base & Controls

Содержание Clodaghl

























Отзывы:

Нет отзывов