SYMBOL IDENTIFICATION
• How to Care for Your Upholstery
SYMBOL
IDENTIFICATION
11
DIRECTIONS FOR USE
DIRECTIONS FOR USE
The optional stationary Table Extender provides ultimate comfort for
your tallest clients, quickly and easily. The Table Extender comes with
two connecting arms that slide into the outlets at the foot end of the
tabletop. Slide these fully into the outlets so the Table Extender is flush
to the end of the table top. This Stationary Extender provides 11” of
additional comfort and support when needed.
The table weighs approximately 300 lbs. (136 kg.) You will need 4 people
working together if it is necessary to move the table. Never lift the table by
grasping the table top as the table top is not designed to hold the weight
of the base and you could damage the table and the electronics that run
the tabletop.
If you need to move the table, place one person at each corner of the
table. We recommend that you have the table top in the up position
(with Arm Rests removed) to have the table top ends out of the way as
much a possible. Have each person firmly grasp the cabinet base at the
bottom by the table legs and lift the table from the base. As when moving
any piece of heavy equipment, bend at the knee and lift with your legs
beneath you and not with your back. Be aware and use proper, safe
procedures for moving a table of this size to prevent injury to yourself
or the table. We strongly recommend that a flatbed dolly be used that
can hold the entire table if moving the table involves any distance.
• Accessory Option:
Table
Extender
CAUTION
Before moving the table,
disconnect the power cord
from the power outlet and
secure the electrical cord,
hand control and foot
controls for moving.
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
CAUTION
The table weighs as much
as 300 lbs. (136 kg.)
DO
NOT
lift or move the unit
without using proper safety
procedures or equipment.
DO NOT
turn the table its
side for any reason. To do
so could cause damage to
the base and
will
void the war-
ranty. There are no service-
able items that require this
action. Never lift the table by
grasping the table top as the
table top is not
designed to
hold the weight of the base
and you could damage the
table.
Outlets
Moving the table
Grasp
at base
corner
CAUTION
Do not put excessive weight
or pressure on the extender.
Excessive pressure can cause
premature failure of the Table
Extender.
Position at low height range