OAKWORKS Clinician Premiere Series, Инструкция по эксплуатации

Страница: 12 / 29

* measurements are determined from floor to top of seat pad using
standard padding; these measurements can be affected by natural material variations in
padding
** published weight may differ due to options chosen, natural
material variations and padding density
1
INSTALLATION - LEVELING INSTRUCTIONS
INSTALLATION INSTRUCTIONS:
The Premiere ™ comes completely assembled and ready to use. Plug the
When
operating the
LEVELING INSTRUCTIONS:
CAUTION
The table weighs as much as 200 lbs.
DO NOT lift or move the unit
without using proper safely
procedures or equipment. DO NOT
turn the
Premiere
™
on its side for
any reason. To do so could cause
damage to the base and
will void the
warranty. There are no serviceable
items that require this action. Never
lift the table by grasping the table
top as the table top is not
designed
to hold the weight of the base and
you could damage the table.
If Table Will Not Sit Flat on the Floor:
The Premiere
™
is equipped with Leveler Feet that adjust to level the table on uneven
floors. To adjust the Leveler Feet to suit common floor differences you will need to
use a
1
/
2
” open-end wrench or an adjustable wrench. Adjust each leg individually in
turn by adjusting the height of each leveler foot until the unit rests level and steady.
This adjustment will not effect the function of the table. The feet can be adjusted out
¼”.
Premiere
™
controls be sure to
observe all cautions and
warnings given in the manual to
prevent injury to both operator
and client.
cord into a functioning outlet that is rated for the table.
Arrange the power cord and control cords so that they will not create a tripping
hazard. Place the controls in a safe location where they are convenient and
accessible. Keep the controls out of the way of all table mechanisms.