37003-02 HumidityLogR Set-Up
The interval may be set to any time from once every 4 seconds to once
every hour.
This example will set the thermohygrometer to print live readings once
every 4 seconds.
Press
SETUP
, then
. The display indicates “minutes:seconds” with the
last printing interval setup shown. The seconds will be flashing.
1.
Press
MAX
(up) or
MIN
(down), until the flashing digits indicate
“04” seconds.
2.
Press
HOLD
(enter). The display will show the minutes flashing.
3.
Press
HOLD
again. The large upper display will show “HP”, “300”,
“600”, “1200” or “2400”.
4.
Press
MAX
until “2400” shows in the upper display.
5.
Press
SETUP
to exit.
Aim the top of the unit at the red window of the adapter at a distance of 12
inches or less.
Transferring Live Readings
To begin data transfer, press
. Whenever the “PRINT” annunciator is
displayed on the unit, and the red light inside the RS-232 adapter is blinking,
data should appear on your computer screen.
Transferring Stored Readings
The “STO” annunciator on the unit’s display indicates that readings are
stored in memory. Press RECALL then PRINT to begin data transfer. “RCL”
and “PRINT” annunciators will be on the thermometer display, and the
number of readings remaining to be transferred will count down. The red
light inside the RS232 adapter should be blinking.
WINDOWS XP Hyperterminal Set-up
1. Click on Accessories, select Communications, then Hyperterminal.
2. Under NAME: Enter a name for your file and click on
OK
.
3. Under CONNECT USING: Choose COM1.
3. Click on
OK
.
4. Under COM1 PROPERTIES: Enter 2400, hit Tab, 8, hit Tab, None, hit Tab,
and 1.
5. Click on
OK
.
6. Check that the red light inside the window of the adapter is on.
7. Align the infrared windows and select PRIN.
5
