Oakley 12 GAUGE, Инструкция по эксплуатации

Страница: 7 / 19

12 GAUGE
™
INSTRUCTION MANUAL 7
TO SET THE ALARM TIME
1. Press and hold button “B” for at least 2 seconds. (The
minute hand on the lower sub dial will jump forward
one minute.)
2. Set the alarm time by pressing button “B”:
Short press (less than 1 second) will advance the
alarm time by the minute.
Long press
(more than 2 seconds) will advance the
alarm time continuously until the button is released.
TO SWITCH THE ALARM ON / OFF
Briefly press button “B”.
Two beeps indicate the alarm is switched on.
One beep indicates the alarm is switched off.
uSING THE ALARM
The lower sub dial shows the alarm time. The alarm can be set a maximum of 12 hours before the desired alarm time.
When the alarm time is reached, a sound is emitted for 20 seconds. If the alarm button is not pressed, this sound is
repeated after two minutes. (Note: While the chronograph is in operation, the alarm cannot be used.)
a b
Button A
Chronograph
Second Hand
Chronograph
Hour And Minutes
Counter
Button B
Date
Secondary
Crown
Alarm
Counter
Seconds
Counter