O2 XM, Руководство пользователя

Страница: 6 / 72

Notes
XIV
trademark of Superscape Inc. All rights reserved.
The data provided in this document are issued “as is”
for information purposes only and with no warranty.
It may contain errors or inaccuracies and is subject
to changes without prior notice. O2 shall not be
liable for any direct, indirect, special, incidental or
consequential damages in connection with the use of
this material.
Mandatory statement
[logo_ce.jpg]
Hereby O2 declares that this mobile phone is in
compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
FCC SAFETY INFORMATION FOR RF EXPOSURE
Body worn operation
This device was tested for typical body-worn operations
with the back of the phone kept 15 mm. from the
body. To maintain compliance with FCC RF exposure
requirements, use only belt-clips, holsters or similar
accessories that maintain a 15 mm. separation distance
between the user’s body and the back of the phone,
including the antenna. The use of belt-clips, holsters
and similar accessories should not contain metallic
components in its assembly. The use of accessories that
do not satisfy these requirements may not comply with
FCC RF exposure requirements, and should be avoided.
SAR INFORMATION
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
emission limits for exposure to radiofrequency (RF)
energy set by the Federal Communications Commission
of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on standards that were developed
by independent scientifi c organizations through
periodic and thorough evaluation of scientifi c studies.
The standards include a substantial safety margin
designed to assure the safety of all persons, regardless
of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known
as the Specifi c Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg*. Tests for SAR are
conducted with the phone transmitting at its highest
certifi ed power level in all tested frequency bands.
Although the SAR is determined at the highest certifi ed
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This
is because the phone is designed to operate at multiple
power levels so as to use only the power required to
reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power
output. Before a phone model is available for sale to
the public, it must be tested and certifi ed to the FCC
that it does not exceed the limit established by the
government adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this
model phone when tested for use at the ear is 0.530