6.
Charging port:
The plug the AC adapter is connected to for charging.
7.
Ear hook: A device that you use to hang the XA-01 on the ear.
Getting started
Before you can use XA-01, you must do following two things:
1.
Fully charge XA-01 5 hours at least before you use it at the first time.
2.
Pair XA-01 with a Bluetooth enabled devices, for example, a mobile phone.
Charging
To charging the XA-01
1.
Connect the adaptor to an electrical outlet.
2.
Plug the adaptor's connector into the charging port.
3.
It takes 2.5-3 hours to fully charge the battery.
Pairing
Power on the XA-01
Long press the upper button for 3 seconds until the blue LED blinks.
Power off the XA-01
Long press the upper button for 3 seconds until the blue LED blinks.
Pairing the XA-01 with your mobile
Before using the XA-01 for the first time, you must pair with a Bluetooth phone. If this is the only
headset you will use with the cell phone, no further pairing is necessary. Make sure that the XA-01 is
switched off before pairing.
1.
Long press the upper button for 5 seconds until the blue and red LED indicator cross blink per
second. Now the XA-01 is in pairing mode.
2.
Perform a Bluetooth device discovery on the cell phone.
3.
Select the “O2 XA-01” from the discovered devices list and confirm the following on screen
prompts.
4.
When prompted by your phone, enter the
passkey “1234”. Your phone will advise that pairing is
successful. The blue LED indicator will blink once every 3 seconds.
Wearing the XA-01
1. Switch the direction of hook to fit your habit.
2. Put the earhook behind your ear and adjust the speaker into your ear canal.
Using the XA-01
