background image

−2− 

!  

!  

!  

Remember  that  your  engine  is  not  a  "  toy  ",  but  a  highly 
efficient  internal-combustion  machine  whose  power  is 
capable  of  harming  you,  or  others,  if  it  is  misused  or 
abused. As owner, you, alone, are responsible for the safe 
operation of your engine, so act with discretion and care at 
all times.
If  at  some  future  date,  your  O.S.  engine  is  acquired  by 
another  person,  we  would  respectfully  request  that  these 
instructions are also passed on to its new owner.

WARNINGS

These  cover  events  which  might  involve  serious  (in 
extreme circumstances, even fatal ) injury.

NOTES

These cover the many other possibilities, generally less 
obvious  sources  of  danger,  but  which,  under  certain 
circumstances, may also cause damage or injury.

SAFETY INSTRUCTIONS AND 

WARNINGS ABOUT YOUR 

O.S. ENGINE

 The advice which follows is grouped under two headings 

according  to  the  degree  of  damage  or  danger  which 
might arise through misuse or neglect.

WARNINGS

Never  touch,  or  allow  any  object  to  come  into 
contact  with,  the  rotating  propeller  and  do  not 
crouch over the engine when it is running.

A weakened or loose propeller may disintegrate or be thrown 
off and, since propeller tip speeds with powerful engines may 
exceed 600 feet(180 meters) per second, it will be understood 
that such a failure could result in serious injury, (see 'NOTES' 
section relating to propeller safety).

Model engine fuel is poisonous. Do not allow it to 
come into contact with the eyes or mouth. Always 
store it in a clearly marked container and out of 
the reach of children.

Model engine fuel is also highly flammable. Keep it 
away from open flame, excessive heat, sources of 
sparks, or anything else which might ignite it. 
Do not smoke or allow anyone else to smoke, near 
to it.

Never  operate  your  engine  in  an  enclosed  space.  Model 
engines,  like  automobile  engines,  exhaust  deadly  carbon-
monoxide. Run your engine only in an open area.

Model  engines  generate  considerable  heat.  Do 
not  touch  any  part  of  your  engine  until  it  has 
cooled.  Contact  with  the  muffler(silencer), 
cylinder  head  or  exhaust  header  pipe,  in 
particular, may result in a serious burn.

−3− 

!  

NOTES

This engine was designed for model aircraft. Do not attempt to use it for any other purpose.

Mount  the  engine  in  your  model  securely,  following  the  manufacturers'  recommendations,  using  appropriate 
screws and locknuts.

Be  sure  to  use  the  silencer  (muffler)  supplied  with  the  engine.  Frequent  exposure  to  an  open  exhaust  may 
eventually impair your hearing. 
Such noise is also likely to cause annoyance to others over a wide area.

Fit a top-quality propeller of the diameter and pitch specified for the engine and aircraft. Locate the propeller on the 
shaft so that the curved face of the blades faces forward-i.e. in the direction of flight. Firmly tighten the propeller nut, 
using the correct size wrench.

Always  check  the  tightness  of  the  propeller  nut  and  retighten  it,  if  necessary,  before  restarting  the  engine, 
particularly in the case of four-stroke-cycle engines. A safety locknut assembly is provided.  Always use it. This will 
prevent the propeller from flying off in the event of a "backfire", even if it loosens.

If you install a spinner, make sure that it is a precision made product and that the slots for the propeller blades 
do not cut into the blade roots and weaken them.

Discard  any  propeller  which  has  become  split,  cracked,  nicked  or  otherwise  rendered  unsafe.  Never  attempt  to 
repair such a propeller: destroy it. Do not modify a propeller in any way, unless you are highly experienced in tuning 
propellers for specialized competition work such as pylon-racing.

Use an electric starter for this engine. The wearing of safety glasses is also strongly recommended.

Содержание O.S. Max-160FXRing











Отзывы: