1. Scope of use
The pressure sprayer is designed for spraying
common home and garden products. This pri-
marily includes pesticides, weed killers and liq-
uid fertilizers.
2. Safety information
앬
Suitable measures must be taken to keep
the unit out of the reach of children.
앬
The pressure sprayer is not designed to
spray acidic and caustic liquids. Nor should
it be used to spray impregnating agents.
앬
Only use a suitable nozzle wire or cleaning
agent to clean clogged nozzles.
앬
Do not spray contents of sprayer on per-
sons or animals.
앬
Always wear protective clothing when
spraying pesticides and insecticides.
앬
Ensure that liquid sprays are not heated
beyond the permitted operating temperatu-
re of 40 °C.
앬
When mixing and working with spray soluti-
ons, always follow the manufacturer’s
instructions.
앬
Each time the spraying unit has not been
used for an extended period of time it
should be checked for possible damage
prior to reusing it.
앬
Immediately replace defective parts.
앬
Use only original replacement parts.
앬
Do not leave the unit (filled or empty) in
direct sunlight.
앬
Before placing the unit in winter storage,
thoroughly clean and dry it out so that it is
not damaged by freezing temperatures.
앬
We will not be liable for any damage that
results from improper repairs and/or impro-
per handling of the unit (e.g. using the unit
in ways for which it was not intended).
앬
Opening the unit or performing maintenan-
ce work on it is only permitted when the
tank is depressurized.
앬
To relieve the pressure, pull up the funnel-
shaped knob connected to the safety valve.
앬
Only spray pesticides that have been
approved by the German Biological
Research Center for Agriculture and
Forestry (BBA) or equivalent.
앬
Please observe the safety data sheets for
chemical materials and preparations com-
pliant with DIN 52 900, „DIN Safety Data
Sheet for Chemical Materials and
Preparations“.
앬
Pesticides include - but are not limited to -
herbicides, insecticides, fungicides and gro-
wth regulators as well as materials that are
intended to be used in conjunction with
these agents in order to modify their pro-
perties or effects.
앬
Each time after using the unit and prior to
performing any maintenance work on it,
release the pressure by raising the pressu-
re valve.
3. Unit description and items
supplied (Fig. 1)
1. Pump / carry handle
2. Spray
lance
3. Release
lever
4. Tank
5. Strap
6. Safety pressure valve
7. Integral filler neck
8. Adjustable spray head
4. Items supplied
앬
Pressure sprayer
앬
Spray lance
앬
Strap
5. Assembly
앬
Screw the spray tube to the pistol grip
(Figure 2).
앬
Do not unscrew the overpressure valve
(Figure 1/6)
앬
Check to ensure that the screw connec-
tions for the hose at the spray gun handle
GB
9
Anleitung DSP 5 OK SPK7 26.01.2006 8:02 Uhr Seite 9
