NZXT AER, Руководство пользователя

Страница: 7 / 20

Size Adjustment
Connect Mic and Audio Cable to either side of headset
Flexible Microphone Boom Arm
Rotate tip of microphone towards mouth
CONNECT THE MICROPHONE BOOM
STEP 02
You’ll find 3.5mm audio jacks at the bottom of both headset “downtubes” (at the bottoms of
each of the earcups). These can both be used for either the headset cable or microphone boom
interchangeably (or in other words, you may connect the cable and mic to the side you prefer).
IMPORTANT:
For proper performance of the
MICROPHONE BOOM, make sure that it is FULLY
SEATED in the headset receptacle. Insert the BOOM’s
connector into the socket while making sure the
positioning key is aligned properly. Check to make
sure that it is fully seated.
The microphone boom is flexible, so
after connecting the microphone and
making sure that it is fully seated
in the 3.5mm jack, position the
microphone by bending it about 1-2
inches away from the corner of your
mouth for best performance.
6
6
7
7
8
8
9
9
05