www.3nod.com.cn
Shenzhen 3NOD Electronics Co., Ltd
Page 4,Total 7 CONFIDENTIAL! © Copyright 3NOD.
Paring the NB-200 with a Bluetooth Device (First time connection)
1. Ensure the NB-200 is fully charged or that the NB-200 is connected to a power source.
2. Turn the main power switch located at the back of the NB-200 to the ON position.
3. Activate your Bluetooth device to the Searching mode (new device searching)
4. Press and hold the ‘Play/Pause’ button on the front of the NB-200 until the Red/Blue LED starts flashing on
front of NB-200. (NB-200 will have 3minutes to connect/pair with your Bluetooth).
5. ‘NB-200’ will appear on your Bluetooth device.
6. Select ‘NB-200’ and enter ‘0000’ for the password if necessary.
7. LED on front of the Speaker will stop flashing and a tone will sound to acknowledge successful paring.
8. Check your Bluetooth device to ensure that connection is successful.
Note: If after 3minutes no connection is made the speaker will sound and the LED will turn OFF.
The unit default audio input is Bluetooth. The source will automatically switch to Aux in mode when a 3.5mm
stereo audio cable inserted, but will not disconnect the connected Bluetooth input this time. And the source will
automatically switch back to Bluetooth input when unplugged the 3.5mm audio cable.
Operation of NB-200 (Device Dependant)
1. Ensure the NB-200 is fully charged or that the NB-200 is connected to a power source.
2. Turn the main power switch located at the back of the NB-200 to the ON position.
3. Turn on your Bluetooth device and select the connection ‘NB-200’.
4. Once connected the following control functions can be used :-
Play Next song – Press at the front of the NB-200.
Play previous song – Press at the front of the NB-200.
Volume Up – Press
at the front of the NB-200.
Volume Down – Press at the front of the NB-200.
Play/Pause – Press
at the front of the NB-200.
)
