NXP Semiconductors
UM11036
Point of Sales (POS) Reader Solution - Quick Start Guide
UM11036
All information provided in this document is subject to legal disclaimers.
© NXP Semiconductors N.V. 2017. All rights reserved.
User manual
COMPANY PUBLIC
Rev. 1.2 — 7 February 2017
406512
8 of 56
2.1.5 Accessories
2.1.5.1 Cables
Two USB cables are provided: One USB Mini to provide power to the system, and one
USB Micro to interface with a computer
2.1.5.2 Battery
A CR2032 Button Cell battery is provided. The battery has to be inserted in the battery
slot on the TWR-POS-K81 board
2.1.5.3 Sample Card
One sample card is included. It is a demo Payment card with dual interface (C
Contactless). The card embeds a secure processor with JCOP OS, running a payment
application.
This payment application can be accessed through Contact or Contactless interface.
Fig 7.
Sample card
2.2 Setup the kit
The kit is delivered already assembled, but in case it is received disassembled or is
disassembled during operation, the next chapters describe how to assemble it.
2.2.1 TWR-Elev Primary and Secondary boards
It is important for the next steps to differentiate the Primary and Secondary TWR-Elev
boards. Depending on the version, the name of the board can be written:
“Secondary board” or “Primary board” on the inner side (i.e the side with the 4 female
PCI connectors).
If the name is not printed on the board, the Primary can be found by its marking “
A
side
expansion port” and “
B
side expansion port”, while the Secondary board embeds “
C
side
expansion port” and “
D
side expansion port”