EXTERNAL USE
8
Camera inputs
•
EVB2 two MIPI camera inputs, and two VIU (parallel)
inputs
•
NXP and distributors sell MIPI cameras designed for use
with this board
•
Additionally can be added and 5V/12V external power
can be provided (see schematics for pinout)
•
WARNING: Power off board before changing any
jumpers or switches.
•
Configuring optional voltage:
For 5V on Cameras 0/1,
set jumpers J7/J5 to 2&3 respectively. For 12V, set to
1&2 respectively.
•
Enabling/Disabling optional voltage:
To enable opt.
voltage for cameras 0/1, set jumpers J6/J4 to 1&2
respectively. To disable opt. voltage, set J6/J4 to 2&3
respectively.
•
NOTE: If you aren’t sure if your camera requires
optional voltage, keep it disabled and refer to
schematics/data sheet for your camera and EVB2.
Содержание S32V234-EVB2
Страница 1: ...EXTERNAL USE S32V234 EVB2 QUICK START GUIDE REV 2 FEBRUARY 2018...
Страница 13: ......