NXP Semiconductors S32V234-EVB2, Быстрый старт, Страница: 11 / 13

EXTERNAL USE
10
Camera configurations
• Another NXP-endorsed camera module is the
OV10635/10640 with MAXIM 9271 Serializer,
paired with the MAXIM 9286 Deserializer (both
pictured). This camera set requires the optional
12V to be enabled.
• To prepare to use the MAX9271/86 Ser/Des
setup, first ensure power is off and unplugged
from the board. Then, choose between MIPI 0 or
1 and configure only J7 or J5 respectively to 1&2
to select 12V. Then, set jumpers J6 or J4 to 1&2
to enable optional voltage.
• Lastly, confirm that the MAX9286 deserializer
board is configured to use board power by setting
its jumper JU4 to the position shown (For Rev A
deserializer boards). For other revisions, refer to
deserializer schematic to find required
configuration.
• Once all of these are set and cameras are
connected, power can be turned on. Be sure to
power off before removing cameras or
components.
Action Camera
on MIPI 0 Camera on MIPI
1
Set to 12V J7=1&2 J5=1&2
Enable voltage J6=1&2 J4=1&2
Disable voltage J6=2&3 J4=2&3