BL ID
Hardware Manual
Project Name: Integration Manual Project ID: 62743
3. Customer Evaluation Board PNEV5180B: SPECIFICATION
3.1.
Customer Evaluation Board PNEV5180B: Specifications
Table 2: Customer Evaluation Board PNEV5180B
– specifications
Antenna
PCB type, 65 mm x 65 mm
Contactless operating frequency
13.56 MHz
Card reading/writing distance
Up to 50 mm
Contactless (RFID) Smart Card Interface
Reader/Writer mode
ISO 14443 A up to 848 Kbps transmission rate (depending on card)
ISO 14443 B up to 848 Kbps transmission rate (depending on card)
Reader/Writer mode supporting JIS X 6319-4 (comparable with FeliCa scheme)
NFC Forum tag type 1,2,3,4,5 reader
NFC Forum compliance for R/W – Analog & Digital
SO/IEC15693 reader (I-Code)
ISO/IEC 18000 EPC-HF reader (I-Code ILT)
EMVCo 2.4 L1 digital & analog Compliance
Peer to Peer mode
Passive-Initiator / Passive-Target
Active-Initiator / Active-Target
P2P supported for types: A (106 kbit/s), F (212,424 kbit/s)
Card Emulation
SO/IEC 14443A (up to 848 kbit/s)
Microcontroller LPC1769
ARM Cortex-M3 based microcontroller with 512 kb internal flash
memory, 64 kb internal RAM
Clock Crystals
12.000 MHz crystal for CPU
Firmware
Customer developed firmware for testing PN5180 functionality
Host Interface
Host Interface
USB 2.0 (also supported USB 1.1)
Transmission Speed
12 Mbps (USB 2.0 full speed)
Power Supply
Bus powered
Other Communication
Interfaces
JTAG IEEE1149.1 Serial
Interface
JTAG 10-pin connector; to connect JTAG adapter
STS Template 1.0
public
© NXP B.V. 2015. All rights reserved
Doc ID: DOC-XXXXXX
Doc Rev 1.00 Preliminary — 2015.11.13
9 of 16