NXP Semiconductors NFC Tandem, Руководство пользователя, Страница: 11 / 18

NXP Semiconductors
NFC Tandem User Manual
447202 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
User manual Rev. 0.2 — 17 August 2018
COMPANY PUBLIC 11 / 18
Figure 9. UDOO Neo board
4.2 Smartphone counterpart device
Additionally, an NFC Android phone with Lollipop (5.0) or later Android version is
required.
The following 2 applications must be installed:
• NXP TagWriter (see [7] )
•
NTAG I2C Demoboard (see [8] )
4.3 Initial setup
Follow the following steps during initial setup of the NFC Tandem demo (only first time
using NFC Tandem board):
1. Download NFC Tandem demo image, either Raspberry Pi (see
[9] ) or UDOO Neo
(see [10] ) related one
2. Write the image to µSD card following instructions for Raspberry Pi (see [11] ) or
UDOO Neo (see [12] )
3. Assemble the NFC Tandem board on the Raspberry Pi or UDOO Neo and insert the
µSD card
4. Format* the NTAG I
2
C plus embedded in the Tandem board using ‘NTAG I2C Demo’
application, « CONFIG » -> « Reset Tag » function