NXP Semiconductors NFC Tandem, Руководство пользователя, Страница: 10 / 18

NXP Semiconductors
NFC Tandem User Manual
447202 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2018. All rights reserved.
User manual Rev. 0.2 — 17 August 2018
COMPANY PUBLIC 10 / 18
4 NFC Tandem demonstration
NFC Tandem functionalities can be demonstrated using NFC Tandem reference
design board together with OM29110/RPI or OM29110/ARD Interface boards (see [3] )
respectively allowing connection to Raspberry Pi board (see [5] ) or Arduino compatible
boards (e.g. UDOO Neo see [6] ).
Figure 7. NFC Tandem board
4.1 Hardware setup
In order to run NFC Tandem demonstration, the following hardware pieces are required:
¤ a microSD card of at least 4Gb (2Gb sufficient for Raspberry Pi setup)
¤ and a computer board, either:
• Raspberry Pi, any B model (see [5] )
+ WLan USB Module (except for Raspberry Pi 3 version where WiFi module is
integrated): e.g. WiPi (see [14] )
Figure 8. Raspberry Pi board and WiPi module
• or UDOO Neo Extended or Full version, since including WiFi module (see [6] )