www.nxp.com
9
Figure 3. SW601 setting for internal boot mode
Figure 2. SW602 setting for internal boot mode
BOOT PROCESS FOR LINUX IMAGE
Boot Process
• Change SW602 back to ON, OFF (from 1-2 bit) to enter internal boot mode, and
then switch SW601 to OFF, OFF, ON, OFF (from 1-4 bit) to boot from the MicroSD
card, as shown in Figure 2 and Figure 3. After the board images are programmed
and the boot switches are correctly configured, the system is ready to run.
• Power on the EVK board.
• During the boot process, there will be operating system status information scrolling
on the terminal window of the PC (if connected). The Linux penguin images will
initially appear in the upper left corner of the LCD screen.
• When the boot process is complete, the Linux operating system (Yocto Project) will be
displayed on the LCD screen.
• To work from the terminal window on the host PC, press ‘Enter’ at the terminal
window to get the command prompt. Account name: root, password none.