NXP Semiconductors
UM10946
LPCXpresso board for LPC4367/43S67/18S37 family of MCUs
UM10946
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2015. All rights reserved.
User manual
Rev. 1.0
— 18 November 2015
4 of 19
Note that Revision A LPCXpresso18S37 boards have different circuit designators and
fewer functions. Please refer to User Manual UM10889 for that version of the board. The
board revision is printed on the silkscreen directly below the ISP button (see
Fig 1.)
2. Feature summary
The LPCXpresso4367 board includes the following features:
On-board, high-speed USB based, Link2 debug probe with support for
ARM’s
CMSIS-DAP and SEGGER J-Link protocol options
Link2 probe can be used with on-board Target MCU or external target
Built-in current measurement
Support for external debug probes
Tri-color LED
Target Reset, ISP and WAKE buttons
Expansion options based on Arduino UNO and PM
od™, plus additional expansion
port pins
UART, I
2
C and SPI port bridging from Target MCU to USB via the on-board debug
probe
FTDI UART connector
8Mb Macronix Quad SPI flash (MX25L8035EM2I-10G)
Ethernet PHY (LAN8720A)
A7001CM Secure Element (LPCXpresso43S67/18S37 only)
2.1 Board layout and settings
This section provides a quick reference guide to the main board components,
configurable items, visual indicators and expansion connectors. The layout of the
components on the LPCXpresso4367 board is shown in
Fig 2
. Default jumper positions
are shown in red: