NXP Semiconductors
UM10946
LPCXpresso board for LPC4367/43S67/18S37 family of MCUs
UM10946
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2015. All rights reserved.
User manual
Rev. 1.0
— 18 November 2015
3 of 19
1. Introduction
The LPCXpresso™ family of boards provides a powerful and flexible development
system for NXP's Cortex
®
-M family of MCUs. They can be used with a wide range of
development tools, including the
NXP’s LPCXpresso IDE. The LPCXpresso4367
(OM13088), LPCXpresso43S67 (OM13084) and Revision B LPCXpresso18S37
(OM13076) boards have been developed by NXP to enable evaluation of and prototyping
with the LPC4300, LPC43S00 and LPC18S00 MCUs respectively, and are based on the
100 pin BGA versions of these MCUs.
Fig 1.
LPCXpresso43xx/18xx
This document describes the LPCXpresso4367, LPCXpresso43S67 and
LPCXpresso18S37 board hardware. These boards are functionally identical (using an
underlying Revision B circuit board) with the exception of target MCU and the
inclusion/exclusion of the A7001CM Secure Element device. The name
LPCXpresso4367 is used throughout this document to refer to all boards. The term
“Target MCU” is used to refer to the Target microcontroller (LPC4367, LPC43S67 or
LPC18S37). The following aspects of interfacing to the boards are covered by this guide:
Main board features
Setup for use with development tools
Supporting software drivers
Board interface connector pin out
Jumper settings
Powering the board
Mechanical drawing