NXP Semiconductors Layerscape FRWY-LS1046A Скачать руководство пользователя страница 9

Table 6. SW1 settings (continued)

Switch

Supported function

Settings

CFG_RCW_SRC[0:8]

• 0_0100_0000: Micro-SD card
• 1_0000_01xx: NAND flash (8-bit bus, 2 KB page, 64 pages/block)

(LS1043A only)

1

• 0_1001_1110: Hard-coded RCW

SW1[10]

System clock source
CFG_ENG_USE0

• 0: DIFF_SYSCLK/DIFF_SYSCLK_B (differential clock) - 100 MHz (fixed)

(default setting)

• 1: SYSCLK (single-ended clock) - 100 MHz (fixed)

1. The LS1046A processor does not support booting from NAND flash.

9 LEDs

The FRWY-LS1046A has light-emitting diodes (LEDs) to monitor system functions, such as power-on, reset, board faults, and
so on. The information collected from LEDs can be used for debugging purposes. LEDs are highlighted in 

Figure 4

 and 

Figure

5

. The table below describes the FRWY-LS1046A LEDs.

Table 7. FRWY-LS1046A LEDs

Reference designator LED color

LED name

Description (when LED is ON)

D2

Yellow

ASLEEP

The processor has not exited Sleep mode, which
generally indicates:

• Improper RCW source selection
• Boot memory does not contain a valid

RCW/PBL

• PLL multipliers in the RCW data are not

compatible with the fixed SYSCLK, DDRCLK,
or SDCLK values

D4

Green

USB1_5V

USB1 port of the dual-port USB connector (J70) is
powered with 5 V supply for external USB device

D508

Green

USB2_5V

USB2 port of the dual-port USB connector (J70) is
powered with 5 V supply for external USB device

D510

1

Green

M.2 Card1

The M.2 PCIe module on M.2 PCIe slot 1 (J46) is
powered properly and its transmitter is ready to
transmit

D511

Green

M.2 Card2

The M.2 PCIe module on M.2 PCIe slot 2 (J52) is
powered properly and its transmitter is ready to
transmit

D509

Green

4_GRN_LED

Four stacked LEDs to indicate:

• Power status
• System readyness
• PROG_SFP fuse programming power enable

1. It is placed on the bottom side of PCB next to J46 connector.

NXP Semiconductors

LEDs

Layerscape FRWY-LS1046A Board Getting Started Guide, Rev. 1, 05/2020

User's Guide

9 / 14

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Downloaded from

Arrow.com.

Содержание Layerscape FRWY-LS1046A















Отзывы: