J55
J46
D510
Figure 5. Board bottom view
5 Reset button
The FRWY-LS1046A has a reset button for manually triggering a system reset. The reset button is highlighted in
Figure 4
. The
table below describes the reset button.
Table 3. Reset button
Part identifier
Switch type
Location
Description
SW6
Push button
On top side of PCB next to
UART2/UART4 header (not
visible on chassis)
When pressed, resets the board and attached
peripherals
The board does not have a power ON/OFF switch. It is powered ON automatically when connected to external
power supply.
NOTE
6 Connectors
Connectors are onboard devices that allow to connect external devices to the board.
Figure 3
and
Figure 5
show FRWY-LS1046A
connectors. The table below describes the connectors.
NXP Semiconductors
Reset button
Layerscape FRWY-LS1046A Board Getting Started Guide, Rev. 1, 05/2020
User's Guide
6 / 14
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from