background image

How to Reach Us:

Home Page:

www.freescale.com

Web Support:

http://www.freescale.com/support

USA/Europe or Locations Not Listed:

Freescale Semiconductor, Inc.
Technical Information Center, EL516
2100 East Elliot Road

 

Tempe, Arizona 85284

 

1-800-521-6274 or +1-480-768-2130
www.freescale.com/support

Europe, Middle East, and Africa:

Freescale Halbleiter Deutschland GmbH
Technical Information Center
Schatzbogen 7
81829 Muenchen, Germany
+44 1296 380 456 (English)
+46 8 52200080 (English)
+49 89 92103 559 (German)
+33 1 69 35 48 48 (French)
www.freescale.com/support

Japan:

Freescale Semiconductor Japan Ltd.

 

Headquarters

 

ARCO Tower 15F

 

1-8-1, Shimo-Meguro, Meguro-ku,

 

Tokyo 153-0064

 

Japan

 

0120 191014 or +81 3 5437 9125
[email protected]

Asia/Pacific:

Freescale Semiconductor China Ltd.

 

Exchange Building 23F

 

No. 118 Jianguo Road

 

Chaoyang District

 

Beijing 100022

 

 

China 

 

+86 10 5879 8000
[email protected]

For Literature Requests Only:

Freescale Semiconductor Literature Distribution Center
P.O. Box 5405
Denver, Colorado 80217
1-800-441-2447 or +1-303-675-2140
Fax: +1-303-675-2150
[email protected]

Freescale and the Freescale logo are trademarks of Freescale 
Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. Qorivva, S12 MagniV, 
SMARTMOS and Xtrinsic are trademarks of Freescale 
Semiconductor, Inc. ARM is the registered trademark of ARM 
Limited. The Power Architecture and Power.org word marks and the 
Power and Power.org logos and related marks are trademarks and 
service marks licensed by Power.org. All other product or service 
names are the property of their respective owners. ©2011 Freescale 
Semiconductor, Inc.

KT912J637UG
Rev. 1.0
2/2012

Information in this document is provided solely to enable system and 
software implementers to use Freescale Semiconductor products. There are 
no express or implied copyright licenses granted hereunder to design or 
fabricate any integrated circuits or integrated circuits based on the 
information in this document.

Freescale Semiconductor reserves the right to make changes without further 
to products herein. Freescale Semiconductor makes no warranty, 
representation or regarding the suitability of its products for any particular 
purpose, nor does Freescale Semiconductor assume any liability arising out 
of the or use of any product or circuit, and specifically disclaims any and all 
liability, including without limitation consequential or incidental damages. 
“Typical” parameters that may be provided in Freescale Semiconductor data 
sheets and/or specifications can and do vary in different applications and 
actual performance may vary over time. All operating parameters, including 
“Typicals”, be validated for each customer application by technical experts. 
Freescale Semiconductor does not convey any license under its patent rights 
nor the rights of others. Freescale Semiconductor products are designed, 
intended, or authorized for use as components in systems intended for 
surgical implant into the body, or other applications intended to support or 
sustain life, or for any other application in which the failure of the Freescale 
Semiconductor product could create a situation where personal injury or 
death may occur. Should Buyer purchase or use Freescale Semiconductor 
products for any such unintended or unauthorized application, Buyer shall 
indemnify and hold Freescale Semiconductor and its officers, employees, 
subsidiaries, affiliates, and harmless against all claims, costs, damages, and 
expenses, and reasonable attorney fees arising out of, directly or indirectly, 
any claim of personal injury or death associated with such unintended or 
unauthorized use, even if such claim alleges that Freescale Semiconductor 
was negligent regarding the design or manufacture of the part. 

Содержание KIT912J637EVME





























Отзывы: