TWR-WIFI-G1011MI Lab Guide
Page 7 of 11
4
Running the Demos
This reference code shows the following two demo’s that use Limited AP mode:
1)
Embedded web server demo
2)
Smart Phone Demo with service discovery (Bonjour)
Below are steps to run the demos (web server and iOS) on the TWR-K60N512 with the TWR-WIFI-
GS1500M:
STEP 1:
a)
Download the
TWR-WIFI-GS1500M Demonstration Software
and unzip.
b)
Start the IAR Embedded Workbench and open the workspace GSK60.eww.
c)
Rebuild the project (“Make” button) and download to the demo target (“Download and Debug”
button). Run the demo by pressing the “Go” button, pressing the F5 key or recycling the power
to the Tower System.
NOTE 1:
When downloading code via OSBDM/OSJTAG, a request may be made to update firmware
and to set the OSBDM/OSJTAG in boot loader mode (J10), follow the on-screen instructions to
perform the upgrade.
NOTE 2:
The firmware loaded on the TWR-WIFI-GS1500M currently supports the UART interface
and the demo code on the TWR-K60N512 uses UART interface.
