TWRS08PT60LAB
TWR
‐
S08PT60
Lab
Guide
Page
11
of
11
7.
Touch pad 1, the motor will decrease the spin speed. Repeat touching pad 1, the motor speed will be
decreased to the minimum and then starts to spin in counter-clockwise direction. Both D7 and D8
flash to reflect the signals from the hall sensor.
8.
Press and release SW2 to stop motor spinning.
9.
Disconnect the power supply from P2 of APMOTOR56F800E.
Learn More:
For more information about Freescale products, please visit
www.freescale.com/8bit
Freescale, the Freescale logo and CodeWarrior are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off.
Processor Expert is a trademark of Freescale Semiconductor, Inc. All other product or service names are the property of their
respective owners. © 2011 Freescale Semiconductor, Inc.