TOWER SYSTEM
11. On the final screen, click “Finish.” The
OSBDM driver is now loaded.
Downloading the Software to
S08MM128
12. Extract the LAB1.zip file to your working
directory (d:\work).
13. Open CodeWarrior for Microcontrollers
v6.3. Use the Windows Start Menu >
All Programs > Freescale CodeWarrior>
CodeWarrior Development Studio for
Microcontrollers V6.3 > CodeWarrior IDE.
NOTE:
It is important to open the correct
CodeWarrior product and version. Multiple
CodeWarrior programs can be installed on the
same computer.
14. In the CodeWarrior menu, select File >
Open. Then, browse to the following path
and file: d:\work\LAB1\MEDEKGSW\SW
for MM devices\ECG for S08MM\Ecg for
S08MM.mcp
15. Ensure that the selected target is “HCS08
FSL Open Source BDM.” Click the “Debug”
button as shown below.
NOTE:
You may encounter compiler warnings.
Please ignore them.
16. If the following warning appears, click “OK.”
17. When the device has been programmed,
close the window and disconnect both
mini-USB cables from TWR-S08MM128
and TWR-SER boards.
