NXP Semiconductors BLDC, Руководство пользователя

Страница: 14 / 23

Hardware setup
BLDC Control Demo User's Guide, Rev. 6, 06/2020
14 NXP Semiconductors
Table 10. FRDM-KE16Z jumper setting
Jumper Setting Jumper Setting Jumper Setting
J7 1-2 J10 1-2 J19 2-3
J8 1-2 J14 1-2 — —
Table 11. FRDM-KE16Z O-
Ω
resistor setting
MCU signal Resistor Add/remove
PTB4/RGB_GREEN R24 remove
PTB4/MC_PWM_CT R25 add
PTB5/RGB_RED R28 remove
PTB5/MC_PWM_CB R29 add
PTC0/GES_R0 R110 remove
PTC0/MC_PWM_AT R111 add
PTC1/GES_R1 R8 remove
PTC1/MC_PWM_AB R13 add
PTD1/RGB_BLUE R6 remove
PTD1/MC_PWM_BB R9 add
PTC1/GES_R1_R6 R107 remove
PTC2/MC_CUR_DCB R108 add
PTC0/GES_R0 R112 remove
PTB2/MC_VOLT_DCB R113 add
Figure 12. FRDM-KE16Z Freedom development board
4.5.6. Freedom development platform assembly
1. Connect the FRDM-MC-LVBLDC shield on top of the FRDM-KVxxx board.
2. Connect the BLDC motor 3-phase wires into the screw terminals on the board.
3. Plug in the USB cable from the USB host to the OpenSDA micro USB connector.
4. Plug in a 12 V DC power supply to the DC power jack.