NXP Semiconductors BLDC, Руководство пользователя

Страница: 1 / 23

© 2020 NXP B.V.
BLDC Control Demo User's Guide
1. Introduction
This document provides instructions for running and
controlling the Brushless DC (BLDC) sensorless
application with the Freedom and Tower System
development boards shown in Table 1 .
The required software, hardware setup, jumper settings,
project arrangement, and user interface is described in
the following sections. For more information, see
Section 9, “References” or visit
www.nxp.com/motorcontrol_bldc .
NXP Semiconductors
Document Number: BLDCDEMOUG
User's Guide
Rev. 6 , 06/2020
Contents
1. Introduction ........................................................................1
2. Supported development boards ...........................................2
3. Motor Control vs. SDK Peripheral Drivers ........................2
4. Hardware setup ...................................................................2
4.1. Linix 45ZWN24-40 motor ....................................... 3
4.2. MIGE 60CST-MO1330 motor ................................ 3
4.3. Tower System .......................................................... 4
4.4. Tower System assembly .......................................... 8
4.5. Freedom development platform ............................... 9
4.6. High-Voltage Platform .......................................... 15
5. Project file structure .......................................................... 15
6. User Interface ................................................................... 17
6.1. Control button ........................................................ 17
6.2. Remote control using FreeMASTER ..................... 17
7. Instructions ....................................................................... 21
7.1. Running the motor ................................................. 21
7.2. Stopping the motor ................................................ 21
7.3. Clearing a fault ...................................................... 21
7.4. Turning on demonstration mode ............................ 21
8. Acronyms and abbreviations ............................................ 21
9. References ........................................................................ 22
10. Revision history ................................................................ 22