background image

3.2 Board images

The table below describes the location in the board partitions of the software images in android_p9.0.0_2.0.0-
ga_image_8mmevk.tar.gz.

Table 1. Board images

Image name

Download target

/u-boot-imx8mm.imx

33 KB offset of MMC for a board with LPDDR4 on it.

/u-boot-imx8mm-ddr4.imx

33 KB offset of MMC for a board with DDR4 on it.

/u-boot-imx8mm-evk-uuu.imx

Bootloader used by UUU for the i.MX 8M Mini board with
LPDDR4 on it. It is not flashed to MMC.

/u-boot-imx8mm-ddr4-evk-uuu.imx

Bootloader used by UUU for the i.MX 8M Mini board with
DDR4 on it. It is not flashed to MMC.

/imx8mm_m4_demo.img

5120 KB offset of MMC.

/partition-table.img

0 offset of MMC. If the actually size of the SD card is larger
than 13 GB, use the default partition-table.img.

/partition-table-7GB.img

0 offset of MMC. If the actually size of the SD card is larger
than 7 GB, use this image as partition-table.img.

/partition-table-28GB.img

0 offset of MMC. If the actually size of the SD card is larger
than 28 GB, use this image as partition-table.img.

/boot.img

boot_a and boot_b partitions.

/vbmeta-imx8mm.img

vbmeta_a and vbmeta_b partitions to support LPDDR4 and
MIPI-to-HDMI output and Direct Stream Digital (DSD)
playback.

/vbmeta-imx8mm-ddr4.img

vbmeta_a and vbmeta_b partitions to support DDR4 and
MIPI-to-HDMI output.

/vbmeta-imx8mm-m4.img

vbmeta_a and vbmeta_b partitions to support LPDDR4,
MIPI-to-HDMI output, and audio playback based on Cortex-
M4 FreeRTOS.

/vbmeta-imx8mm-mipi-panel.img

vbmeta_a and vbmeta_b partitions to support LPDDR4 and
MIPI panel output.

/system.img

system_a and system_b partitions.

/vendor.img

vendor_a and vendor_b partitions.

/dtbo-imx8mm.img

dtbo_a and dtbo_b paritions to support LPDDR4, MIPI-to-
HDMI output, and DSD playback.

/dtbo-imx8mm-ddr4.img

dtbo_a and dtbo_b paritions to support DDR4 and MIPI-to-
HDMI output.

/dtbo-imx8mm-m4.img

dtbo_a and dtbo_b paritions to support LPDDR4, MIPI-to-
HDMI output, and audio playback based Cortex-M4
FreeRTOS.

/dtbo-imx8mm-mipi-panel.img

dtbo_a and dtbo_b paritions to support LPDDR4 and MIPI
panel output.

3.3 Flashing board images

The board image files can be flashed into the target board using Universal Update Utility (UUU).

For the UUU binary file, download it from github: 

uuu release page on github

.

Working with the i.MX 8M Mini EVK Board

Android™ Quick Start Guide, Rev. P9.0.0_2.0.0-ga, 04/2019

NXP Semiconductors

5

Содержание Android i.MX 8M Mini
































Отзывы: