background image

5.2 Board images

The table below describes the location in the board partitions of the software images in android_p9.0.0_2.0.0-
ga_image_8qmek.tar.gz.

Table 5. Board images

Image name

Download target

/u-boot-imx8qm.imx

0 KB offset of eMMC and 32 KB offset of SD card.

u-boot-imx8qm-mek-uuu.imx

Bootloader used by UUU for i.MX 8QuadMax MEK board. It
is not flashed to MMC.

/partition-table.img

Program to the first 17 KB, and then back up to the last 17
KB of the boot storage. GPT table image for 16 GB boot
storage.

/partition-table-7GB.img

Program to the first 17 KB, and then back up to last 17 KB
of the boot storage. GPT table image for 8 GB boot storage.

/partition-table-28GB.img

Program to first 17 KB, and then back up to last 17 KB of
the boot storage. GPT table image for 32 GB boot storage.

/boot.img

boot_a and boot_b paritions

/vbmeta-imx8qm.img

vbmeta_a and vbmeta_b partitions to support LVDS-to-
HDMI/MIPI-to-HDMI display.

/vbmeta-imx8qm-hdmi.img

vbmeta_a and vbmeta_b partitions to support physical
HDMI display.

/vbmeta-imx8qm-mipi-panel.img

vbmeta_a and vbmeta_b partitions to support MIPI panel
display.

/system.img

system_a and system_b partitions.

/vendor.img

vendor_a and vendor_b partitions.

/dtbo-imx8qm.img

dtbo_a and dtbo_b partitions to support LVDS-to-HDMI/
MIPI-to-HDMI display.

/dtbo-imx8qm-hdmi.img

dtbo_a and dtbo_b partitions to support physical HDMI
display.

dtbo-imx8qm-mipi-panel.img

dtbo_a and dtbo_b partitions to support MIPI panel display.

5.3 Flashing board images

The board image files can be flashed into the target board using Universal Update Utility (UUU).

For the UUU binary file, download it from github: 

uuu release page on github

.

To achieve more flexibility, two script files are provided to invoke UUU to automatically flash all Android images.

• uuu_imx_android_flash.sh for Linux OS
• uuu_imx_android_flash.bat for Windows OS

For this release, these two scripts are validated on UUU 1.2.91 version. Download corresponding version from github:

• For Linux OS, download the file named "uuu".
• For Windows OS, download the file named "uuu.exe".

Because the two script files will direclty invoke UUU, make sure that UUU is in a path contained by the system environment
variable of "PATH".

Working with the i.MX 8QuadMax MEK Board

Android™ Quick Start Guide, Rev. P9.0.0_2.0.0-ga, 04/2019

NXP Semiconductors

21

Содержание Android i.MX 8M Mini
































Отзывы: