WARNING!
Before installing this unit onto any panel, ALWAYS ensure that there is
sufficient clearance behind the panel and that no wiring harnesses, fuel
lines, or any other critical components are exposed or damaged by the
installation. NEVER risk damaging the when cutting your opening.
IMPORTANT INSTALLATION NOTE
This unit is for use in places with a negative ground 12V power supply. Be
sure to disconnect the battery’s negative (-) terminal before starting. This
is to prevent short circuits during installation. The use of unauthorized
parts can cause permanent damage to the unit.
INSTALL INSTRUCTIONS
Be sure to carefully read and understand the instructions before attempt-
ing to install the unit:
1. Attach threaded bolts to the back of the VMPS35
2. Position the mounting bracket over the bolts
3. Place washers over bolts and securely attach nuts
4. Depending on the size of your mounting baffle, you may need to snap
5.
off one or more of the metal tabs from the mounting bracket to
6.
accommodate the installation
5. Firmly tighten the remaining four screws on the front panel of the unit
5
