NVision Multi Chemistry 4x50W, Инструкция по эксплуатации

Страница: 16 / 80

nVision Multi Chemistry High-End Charger 16
While the charger is charging or discharging the battery, by pressing the START key and using the +
and - keys you can modify the actual charge and discharge current. Then, press the START key again.
You can use the + and - keys to change the information displayed on the screen. Please refer to p.12
for information about the various screens available.
Once the charger has determined that the charge or discharge is complete, the charger stops and the
“FULL” or “END” message is displayed.
FULL 5.0A 8.00V
CHG 030:00 03000
Extra information display
While the charger is charging or discharging a battery, you can use the - and + keys to display extra
information.
NiMH Sensitivity Indicates delta-peak sensitivity for NiMH
D.Peak Default
NiCd Sensitivity Indicates delta-peak sensitivity for NiCd
D.Peak Default
End Voltage Indicates Lithium battery end voltage
8.4(2S)
4.10 4.10 0.00
Individual cell voltage display for lithium batteries
0.00 0.00 0.00 (only if balancing connector is used)
Note: you can stop the current process
at any time by pressing the STOP key.