Nvidia nForce2 Ultra 400 Скачать руководство пользователя страница 8

Страница: 8 / 78

Introduction

Page 1-2

1-2 Mainboard Features

Brief Introduction

Athlon

Processor

The AMD Athlon

is a seventh-generation micro architecture with an integrated

L2 cache, which is powerful enough to support the bandwidth requirements of a

large range of applications, hardware, graphics, and memory technologies.

For more information about all the new features Athlon

Processor deliver, check out

the AMD website at http://www.amd.com

Chipset

This board is designed with nVidia chipset, nForce2

Ultra 400 as North Bridge

and nForce2

RAID MCP as South Bridge, The nForce2 Ultra 400 delivers twice

the bandwidth by implementing the new NVIDIA DualDDR™ Memory Architec-

ture speed to DDR 400 memories. This generation System Platform Processor

also implements the AGP 8X interface, HyperTransport Link, and is fully

compliant with industry standard power management specifications such as

ACPI 2.0 and PCI Power Management Interface (PMI) Spec 1.1.

For more details about the NVIDIA nForce2 MCPs, please visit the NVIDIA Web

site at http://www.nvidia.com.

Accelerated Graphics Port (AGP)

The AGP slot on the board is compliant with the new AGP 3.0 specification. This

new specification enhances the functionality of the original AGP specification

by allowing 8X data transfers ( 8 data samples per clock) resulting in maximum

bandwidth of 2.1GB/s. Only 1.5V AGP cards are supported.

Ultra ATA100/133

The mainboard provides an Ultra ATA100/133 Bus Master IDE controller. This

controller supports Ultra ATA100/133 protocols which are ideal to support

demanding applications such as real-time video, multimedia, and a high perfor-

mance operating system. A new IDE cable is required for Ultra ATA100/133.

Hardware Monitoring

Hardware monitoring enables you to monitor various aspects of the system

operation and status. This includes CPU temperature, voltage and fan speed in

RPMs.

Содержание nForce2 Ultra 400















































































Результаты поиска

Содержание nForce2 Ultra 400

Отзывы:

Похожие инструкции для nForce2 Ultra 400

Бренды по названию

Популярные бренды

Nvidia nForce2 Ultra 400, Руководство пользователя

Результаты поиска

Содержание nForce2 Ultra 400

Отзывы:

Похожие инструкции для nForce2 Ultra 400

Бренды по названию

Популярные бренды