Nvidia Mellanox ConnectX-5, Руководство пользователя

Страница: 19 / 71

19
•
•
•
1.
2.
3.
1.
To replace the bracket you will need the following parts:
The new bracket of the desired form factor.
The screws supplied with the new bracket kit.
The required torx tool type as specified in the instructions.
Removing the Existing Bracket
Using the torx tool type listed in the below table, remove the screws according to the
instructions per OCP 3.0 bracket type.
Internal Lock Bracket Pull-tab (Thumbscrew)
Bracket
Ejector-Latch Bracket
Gently separate the bracket from the OCP 3.0 card.
Internal Lock Bracket Pull-tab Bracket Ejector-Latch Bracket
Save the two screws.
Installing the New Bracket
Assemble the new bracket onto the card.
Be careful not to put stress on the LEDs on the adapter card.
