Nvidia MCX621202AC-ADAT, Руководство пользователя

Страница: 17 / 79

17
Interfaces
The below figures show the component side of the ConnectX-6 Dx adapter card. Each numbered
interface that is referenced in the figures is described in the following table with a link to detailed
information.
Callout Item Description
1 “ConnectX-6 Dx IC”
ConnectX-6 Dx IC on the board.
2 “Ethernet SFP28/SFP56/QSFP56
Interface”
Ethernet traffic is transmitted through the adapter's
SFP28/SFP56/QSFP56 connectors. The networking
connectors allow for the use of modules, optical and
passive cable interconnect solutions.
3 "PCI Express Interface" PCIe Gen 3.0/4.0 through an x8/x16 edge
connector.
4 “Networking Ports LEDs Interface” There are two I/O LEDs per port to indicate speed
and link status.
“SMBus Interface” Allows BMC connectivity using MCTP over SMBus or
MCTP over PCIe protocols.
“Voltage Regulators” Voltage supply pins that feed onboard regulators.
The below figures are for illustration purposes only and might not reflect the current
revision of the adapter card.
