manualshive.com logo in svg

Nvidia 920-9B210-00FN-0D0, Руководство пользователя

Поделиться
Скачать
Nvidia 920-9B210-00FN-0D0 Скачать руководство пользователя страница 43

43

•
•

Reset Button

The reset button is located on the front side of the system under the USB port. This reset button 
requires a tool to be pressed.

To reset the system, push the reset button for less than 15 seconds.
When using an Onyx (MLNX-OS) based system, keeping the reset button pressed for more than 

15 seconds will reset the system and the “admin” password, this should allow you to enter 
without a password and set a new password for the user “admin”.

LEDs

See 

LED Notifications

.

LED Notifications

The system’s LEDs are an important tool for hardware event notification and troubleshooting.

LEDs Symbols

Symbol

Name

Description

Normal Conditions

System Status LED

Shows the health of the system.

Green/Flashing green when 
booting

Power Supply Units LEDs

Shows the health of the power 
supply units.

Green

Only original NVIDIA 

cables supplied with the switch package

 can be used to connect 

a switch system to the server.

Connecting any cable other than the NVIDIA supplied console cable may cause an I²C hang. 

Using uncertified cables may damage the I²C interface.

Refer to the 

.Replacement Parts Ordering Numbers v2.4

 appendix for harness details.

Do not use a sharp pointed object such as a needle or a push pin for pressing the 

reset button. Use a flat object to push the reset button.

Содержание 920-9B210-00FN-0D0




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды